🎉 Up to 70% Off Selected ItemsShop Sale
HomeStore

Clack (H1023)-Poly Tubing, Natural 3/8" OD x 1/4" ID

Product image 1

Clack (H1023)-Poly Tubing, Natural 3/8" OD x 1/4" ID

This Clack H1023 natural polyethylene tubing measures 3/8" outer diameter by 1/4" inner diameter, designed for drain and brine line applications in water softener systems. Food-grade construction ensures safe contact with potable water throughout the softening cycle.
SPECIFICATIONS

Clack H1023 Tubing Technical Details

Model Number Clack H1023
Material Natural Polyethylene (PE)
Outer Diameter 3/8 inch
Inner Diameter 1/4 inch
Wall Thickness 1/16 inch
Application Drain lines, brine lines, overflow lines
Temperature Range 33°F to 140°F
Compliance NSF/ANSI 61 certified for potable water
INSTALLATION & USE

How to Install Poly Tubing

  1. Cut tubing to required length using a sharp utility knife or tubing cutter for a clean, square edge
  2. Push tubing firmly into compression fittings or barbed connectors until it seats fully against the internal stop
  3. For barbed fittings, secure the connection with a stainless steel hose clamp rated for continuous water contact
  4. Avoid sharp bends or kinks that restrict flow; use a minimum bend radius of 2 inches for this tubing size
COMPATIBILITY

System Compatibility

This 3/8" OD x 1/4" ID tubing is compatible with all Clack water softener control valves including WS1, WS1.25, WS2, and V3000 series models. It works with standard 1/4" compression fittings and 3/8" barbed connectors commonly found on brine tanks, drain saddles, and air check assemblies. Also suitable for use with Fleck, Autotrol, and other softener brands using the same tubing dimensions.

🔧 Pro tip: When routing drain tubing, maintain a downward slope to ensure gravity drainage and prevent backflow into the control valve during regeneration cycles.
$1.86

Original: $5.32

-65%
Clack (H1023)-Poly Tubing, Natural 3/8" OD x 1/4" ID—

$5.32

$1.86

Product Information

Shipping & Returns

Description

This Clack H1023 natural polyethylene tubing measures 3/8" outer diameter by 1/4" inner diameter, designed for drain and brine line applications in water softener systems. Food-grade construction ensures safe contact with potable water throughout the softening cycle.
SPECIFICATIONS

Clack H1023 Tubing Technical Details

Model Number Clack H1023
Material Natural Polyethylene (PE)
Outer Diameter 3/8 inch
Inner Diameter 1/4 inch
Wall Thickness 1/16 inch
Application Drain lines, brine lines, overflow lines
Temperature Range 33°F to 140°F
Compliance NSF/ANSI 61 certified for potable water
INSTALLATION & USE

How to Install Poly Tubing

  1. Cut tubing to required length using a sharp utility knife or tubing cutter for a clean, square edge
  2. Push tubing firmly into compression fittings or barbed connectors until it seats fully against the internal stop
  3. For barbed fittings, secure the connection with a stainless steel hose clamp rated for continuous water contact
  4. Avoid sharp bends or kinks that restrict flow; use a minimum bend radius of 2 inches for this tubing size
COMPATIBILITY

System Compatibility

This 3/8" OD x 1/4" ID tubing is compatible with all Clack water softener control valves including WS1, WS1.25, WS2, and V3000 series models. It works with standard 1/4" compression fittings and 3/8" barbed connectors commonly found on brine tanks, drain saddles, and air check assemblies. Also suitable for use with Fleck, Autotrol, and other softener brands using the same tubing dimensions.

🔧 Pro tip: When routing drain tubing, maintain a downward slope to ensure gravity drainage and prevent backflow into the control valve during regeneration cycles.
Clack (H1023)-Poly Tubing, Natural 3/8" OD x 1/4" ID | Isopure Water