Fleck (60129) 2850 Piston Seals & Spacers
Fleck 2850 Piston Seal Kit Details
| Manufacturer | Fleck |
| Part Number | 60129 |
| Compatible Valve | Fleck 2850 Control Valve |
| Component Type | Piston Seals & Spacers |
| Material | NBR Rubber / Nylon Spacers |
| Application | Water Softener Control Valves |
| Service Life | 3-5 years typical |
| Installation Type | Replacement Service Kit |
Replacing Piston Seals in Fleck 2850 Valves
- Depressurize the system and disconnect power to the control valve, then remove the valve cover and lift out the piston assembly
- Remove old seals and spacers from the piston, clean all surfaces thoroughly with a lint-free cloth to remove mineral deposits or debris
- Install new seals and spacers per the Fleck 2850 service manual, ensuring proper orientation and seating in the piston grooves
- Lubricate seals lightly with silicone grease, reinstall the piston assembly, and run a manual regeneration cycle to verify proper sealing
Fleck 2850 Valve Systems
This seal and spacer kit is designed exclusively for Fleck 2850 control valves used in residential and light commercial water softener applications. The 2850 valve is commonly found in mid-capacity softening systems ranging from 0.75 to 2.0 cubic feet of resin. Not compatible with Fleck 5600, 7000, or 9000 series valves, which require different seal dimensions and piston configurations.
Original: $191.67
-65%$191.67
$67.08Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Fleck 2850 Piston Seal Kit Details
| Manufacturer | Fleck |
| Part Number | 60129 |
| Compatible Valve | Fleck 2850 Control Valve |
| Component Type | Piston Seals & Spacers |
| Material | NBR Rubber / Nylon Spacers |
| Application | Water Softener Control Valves |
| Service Life | 3-5 years typical |
| Installation Type | Replacement Service Kit |
Replacing Piston Seals in Fleck 2850 Valves
- Depressurize the system and disconnect power to the control valve, then remove the valve cover and lift out the piston assembly
- Remove old seals and spacers from the piston, clean all surfaces thoroughly with a lint-free cloth to remove mineral deposits or debris
- Install new seals and spacers per the Fleck 2850 service manual, ensuring proper orientation and seating in the piston grooves
- Lubricate seals lightly with silicone grease, reinstall the piston assembly, and run a manual regeneration cycle to verify proper sealing
Fleck 2850 Valve Systems
This seal and spacer kit is designed exclusively for Fleck 2850 control valves used in residential and light commercial water softener applications. The 2850 valve is commonly found in mid-capacity softening systems ranging from 0.75 to 2.0 cubic feet of resin. Not compatible with Fleck 5600, 7000, or 9000 series valves, which require different seal dimensions and piston configurations.
