Watts (WCB20FF-CHLORA) 20"x4.5" Big Blue High Performance Coconut Shell Catalytic Carbon Block for Chloramine Removal
Watts (WCB20FF-CHLORA) 20"x4.5" Big Blue High Performance Coconut Shell Catalytic Carbon Block for Chloramine Removal
Watts WCB20FF-CHLORA Technical Details
| Dimensions | 20" x 4.5" (Big Blue) |
| Micron Rating | 1 Micron Nominal |
| Flow Rate | 7 GPM Maximum |
| Chlorine Capacity | 200,000+ gallons @ 4 GPM |
| Chloramine Capacity | 24,000 gal @ 2 GPM / 12,000 gal @ 4 GPM |
| Media Type | Coconut Shell Catalytic Carbon Block |
| Filter Type | Standard Wall |
| Applications | Whole-house POE, Commercial POU |
Installing Your Catalytic Carbon Filter
- Turn off water supply and relieve pressure from your 20" Big Blue housing by opening a downstream faucet
- Remove housing sump using a filter wrench, discard old filter, and clean the sump with mild soap and water
- Insert the Watts WCB20FF-CHLORA filter into the housing, ensuring it seats properly on the center post
- Lubricate the o-ring with silicone grease, hand-tighten the sump, and slowly turn water back on to check for leaks
- Flush filter for 5 minutes at low flow to remove any carbon fines before normal use
Housing Requirements
The WCB20FF-CHLORA fits all standard 20" x 4.5" Big Blue filter housings, including Watts, Pentek, Hydronix, and other industry-standard brands. This filter is designed for whole-house point-of-entry systems where chloramine removal is required, particularly in municipal water systems that have switched from chlorine to chloramine disinfection. The 1 micron nominal filtration also provides sediment and particulate reduction alongside chemical contaminant removal.
Original: $280.69
-65%$280.69
$98.24Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Watts WCB20FF-CHLORA Technical Details
| Dimensions | 20" x 4.5" (Big Blue) |
| Micron Rating | 1 Micron Nominal |
| Flow Rate | 7 GPM Maximum |
| Chlorine Capacity | 200,000+ gallons @ 4 GPM |
| Chloramine Capacity | 24,000 gal @ 2 GPM / 12,000 gal @ 4 GPM |
| Media Type | Coconut Shell Catalytic Carbon Block |
| Filter Type | Standard Wall |
| Applications | Whole-house POE, Commercial POU |
Installing Your Catalytic Carbon Filter
- Turn off water supply and relieve pressure from your 20" Big Blue housing by opening a downstream faucet
- Remove housing sump using a filter wrench, discard old filter, and clean the sump with mild soap and water
- Insert the Watts WCB20FF-CHLORA filter into the housing, ensuring it seats properly on the center post
- Lubricate the o-ring with silicone grease, hand-tighten the sump, and slowly turn water back on to check for leaks
- Flush filter for 5 minutes at low flow to remove any carbon fines before normal use
Housing Requirements
The WCB20FF-CHLORA fits all standard 20" x 4.5" Big Blue filter housings, including Watts, Pentek, Hydronix, and other industry-standard brands. This filter is designed for whole-house point-of-entry systems where chloramine removal is required, particularly in municipal water systems that have switched from chlorine to chloramine disinfection. The 1 micron nominal filtration also provides sediment and particulate reduction alongside chemical contaminant removal.
